On our research results in the field of manufacturing technology and production engineering and in the specific tool and process optimization in the machining of superalloys for aerospace technology using CFD, FSI and FEM simulation as well as intelligent and autonomous systems engineering.
SCIENTIFIC PUBLICATIONS
The following list contains a selection of publications of results of my research projects as well as other publications in which I have been involved. The publications have been developed within the scope of my work at the Institute of Machining Technology (ISF) at TU Dortmund University.
International and National with peer review
International Science Citation Index (SCI)
International Science Citation Index Expanded (SCIE)
Özkaya, T.; Erkan, K.: Neural Network Modeling of a 4-Pole 3-DoF Magnetic Levitation System based on NARX Architectur. Department of Mechatronics Engineering, Yildiz Technical University, YTU Magnetic Levitation Laboratorium
Biermann, D.; Saelzer, J.; Berger, S.; Gerken, J.F.; Oezkaya, E.; Iovkov, I.: Schneidstoffanwendungen. VDI Ausschusssitzung, Düsseldorf, Germany, 22.04.2020
Bücker, M.; Oezkaya, E.; Hensler, U.; Biermann, D.: A New Flank Face Design Leading to an Improved Process Performance when Drilling High-Temperature Nickel-Base Alloys. MIC Procedia on SSRN, 20th Machining Innovations Conference for Aerospace Industry 2020 (MIC 2020), December 2nd2020, Hannover, Germany
Biermann, D.; Saelzer, J.; Berger, S.; Gerken, J.F.; Oezkaya, E.; Iovkov, I.: Schneidstoffanwendungen. VDI Ausschusssitzung, Düsseldorf, Germany, 22.04.2020
Bücker, M.; Oezkaya, E.; Hensler, U.; Biermann, D.: A New Flank Face Design Leading to an Improved Process Performance when Drilling High-Temperature Nickel-Base Alloys. MIC Procedia on SSRN, 20th Machining Innovations Conference for Aerospace Industry 2020 (MIC 2020), December 2nd2020, Hannover, Germany
Biermann, D.; Oezkaya, E.; Iovkov, I.: Fluid Structure Interaction (FSI) Modelling of Deep Hole Twist Drilling with Internal Cutting Fluid Supply. 69th CIRP General Assembly, Birmingham, UK, 18-24-August 2019
Michel, S.; Oezkaya, E.: Zusammenspiel von Experiment und Simulation bei der Weiterentwicklung von Wendeltiefbohrern. VDI-Fachtagung - Präzisions- und Tiefbohren aktuell 2019, Dortmund, Germany, 27. - 28.03.2019
Biermann, D.; Vogel, F.; Oezkaya, E.; Wiederkehr, P.; Baumann, J.: Innovative Werkzeug-und Prozessentwicklung mit Tiefgang. 11mav Innovationsforum, Böblingen, Germany, March 21th 2019
Biermann, D.; Tiffe M.; Bücker M.; Oezkaya E.: New methods for the optimal design of tools and processes. Hanser Conference: Precision Tools in Machining Manufacturing, Nürtingen, Germany, 21-22.2.2019
Ucak, N.; Cicek, A.; Oezkaya, E.; Aslantas, K.: Finite element simulations of cutting force, torque, and temperature in drilling of Inconel 718. 17th Conference on Modelling of Machining Operations, Sheffield, UK, June 13th-14th 2019
Biermann, D.; Aßmuth, R.; Bücker, M.; Tiffe, M.; Oezkaya, E.: Simulationsbasierte Werkzeug- und Prozessauslegung für Hochleistungswerkstoffe. 13 Schmalkalder Werkzeugtagung, „Werkzeugtechnik der Zukunft – Evolution oder Revolution?“, Schmalkalden, Germany, 14.-15.November 2018
Vogel, F.; Oezkaya, E.; Biermann, D.: Vibration suppression in turning of titanium using a novel cavity design of tool holders manufactured by Selective Laser Melting (SLM). Seco Tools R&D Meeting, Dortmund, Germany, November 12th, 2018
Schnabel, D.; Oezkaya, E.; Biermann, D.; Eberhard, P.: Transient simulation of cooling-lubricant flow for deep-hole drilling-process. 8th Conference on High Performance Cutting, Hungary, Budapest, June 25th-27th 2018
Bücker, M.; Oezkaya, E.; Biermann, D.: Investigations on the effects of an innovative flank face modification for the drilling of nickel-base alloys. 18th Machining Innovations Conference for Aerospace Industry, MIC 2018, Garbsen, Germany, November 28th and 29th 2018
Vogel, F.; Oezkaya, E.; Biermann, D.: Influence of additive tool holders on process dynamics during turning of TiAl6V4. Arbeitskreistreffen Spanntechnik, Borken, Germany, Juli 04th 2018
Biermann, D.; Oezkaya, E.; Michel, S.: Developments to improve coolant supply for challenging machining processes. KSS-Seminar West, Dortmund, Germany, April 05 th 2018
Biermann, D.; Freiburg, D.; Aßmuth, R.; Tiffe, M.; Michel, S.; Oezkaya, E: Basic process analyses for the targeted optimization of tools. Schwer zerspanbare Werkstoffe in der industriellen Praxis Dortmund, Germany, March 07th -08th 2018
Bücker, M.; Biermann, D.; Oezkaya, E.; Tiffe, M.: Experimental investigations for a simulative optimization of the cutting edge design oft twist drills used in the machining of Inconel 718. New Production Technologies in Aerospace Industry - Machining Innovation Conference Hannover, Germany, 6th December 2017
Biermann, D.; Beer, N.; Oezkaya, E.: CFD simulation for internal coolant channel design of tapping tools to reduce tool wear. CIRP General Assembly in Lugano, Switzerland, pp. 20-26, 20-26.8.2017
Biermann D.; Tiffe M.; Kirschner M.; Oezkaya, E.; Freiburg D.; Nickel J.: New methods for the optimal design of tools and processes. Hanser Conference: Precision Tools in Machining Manufacturing, Nürtingen, Germany, 21-22.2.2017
Biermann, D.; Beer, N.; Oezkaya, E.; Tiffe, M.; Wolf, M.: Simulation based optimization of the cutting edge microstructure of coated VHM drilling tools. 35th Hagen Symposium Powder metallurgy, machining of and with powder metallurgical materials, Hagen, Germany, 25.11.2016
Biermann, D.; Beer, N.; Oezkaya, E.; Tiffe, M.; Wolf, M.: Simulation based optimization of details of cutting tools and cutting processes. Conference transcript of the 3th Vienna Production Technology – Adaptive & Smart Manufacturing, Vienna, pp. 161-166, 28-29.9.2016
Aslantas, K.; Ucun, I.; Hopa, H. E.; Percin, M.; Oezkaya, E.: Performance Evaluation of a hybrid cooling-lubrication system in micro-millig of Ti6Al4V alloy. 7thCIRP Conference on high performance cutting HPC, Chemnitz, Germany, 31.5-2-6.2016
Biermann, D.; Tiffe, M.; Oezkaya, E.: Simulation-supported optimization of the cutting edge microstructure using the finite elements method using the example of a twist drill. Fachgespräch zwischen Industrie und Hochschule Zerspanen im modernen Produktionsprozess, Dortmund, Germany, 24.9.2015
Abrahams, H.; Bathe, T.; Baumann, J.; Biermann, D.; Hense, R.; Kersting, P.; Oezkaya, E.; Rautert, C.; Siebrecht, T.; Zabel, A.: Current research at the Institute of Machining Technology. Lecture in the framework program of the General Meeting of the Machining Innovation Network (MIN), Varel, Germany, 25.2.2015
Ucun, I.; Aslantas, K.; Cicek, A.; Oezkaya, E.: Mikro frezeleme işleminin 3 boyutlu sonlu elemanlar analizi, 3-D Finite Element Analysis of Micro Milling. 6. Ulusal Talaşli Imalat Sempozyumu, Sabanci Üniversitesi, Istanbul, Turkey, 2015
Ucun, I.; Aslantas, K.; Oezkaya, E.; Cicek, A.: 3-D Numerical Modelling of Micro Milling Process of Ti6Al4V Alloy. Advance in Materials & Processing Technologies Conference, Madrid/Spain, 14.-17.12. 2015
Beer, N.; Oezkaya, E.; Biermann, D.: Drilling of Inconel 718 with geometry optimized twist drills. 5th Machining Innovations Conference – New Production Technologies in Aerospace Industry, Procedia CIRP, Hannover, Germany, 19.-20.11.2014
ARTEQ R&D and EngIneerIng ©
Copyright © 2021-2024 ARTEQ R&D and EngIneerIng – All rIghts reserved.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.