List of Selected Publications
SCIENTIFIC PUBLICATIONS
The following list contains a selection of publications of results of my research projects as well as other publications in which I have been involved. The publications have been developed within the scope of my work at the Institute of Machining Technology (ISF) at TU Dortmund University.
International and National with peer review
International Science Citation Index (SCI)
International Science Citation Index Expanded (SCIE)
2022
Oezkaya, E.; Michel, S.; Biermann, D.: Experimental and computational analysis of the cooling and lubrication efficiency considering the viscosity of the cutting fluid during helical deep hole drilling. International Journal of Advances in Manufacturing (2022), pp. 1-15, doi.org/10.1007/s40436-021-00383-w
Baumann, A.; Oezkaya, E.; Biermann, D.; Eberhard, P.: Geometry modifications of single-lip drills to improve cutting fluid flow. The International Journal of Advanced Manufacturing Technology, (2022), Springer, pp. 1689–1695, doi.org/10.1007/s00170-022-09400-z
Oezkaya, E.; Baumann, A.; Baumann, A.; Biermann, D.: Analysis of the cutting fluid behavior with a modified micro single-lip deep hole drilling tool. CIRP Journal of Manufacturing Science and Technology, (2022), pp. 93-104, doi.org/10.1016/j.cirpj.2022.04.003
International and National with peer review
International Science Citation Index (SCI)
International Science Citation Index Expanded (SCIE)
2021
Oezkaya, E.; Fuss, M.; Biermann, D.: A Mathematical Model to Describe the Inner Contour of Moineau Stators. ASME – Journal of Manufacturing Science and Engineering 143 (2021) 4, pp. 041003-041014, doi.org/10.1115/1.4048437
Oezkaya, E.; Fuss, M.; Metzger, M.: Investigation of coolant distribution of bottle boring systems with computational fluid dynamics simulation. CIRP Journal of Manufacturing Science and Technology 35 (2021), pp. 259-267, doi.org/10.1016/j.cirpj.2021.05.012
Baumann, A., Oezkaya, E.; Schnabel, D.; Biermann, D., Eberhard, P.: Cutting-Fluid Flow with Chip Evacuation during Micro Twist Deep-Hole Drilling. European Journal of Mechanics / B Fluids (2021), pp. 473-484, doi.org/10.1016/j.euromechflu.2021.07.003
Oezkaya, E.; Baumann, A.; Michel, S.; Schnabel, D.; Biermann, D.; Eberhard, P.: Cutting fluid behavior under consideration of chip formation during micro single-lip deep hole drilling of Inconel 718. International Journal of Modelling and Simulation (2021), Taylor & Francis pp. 1-16, doi.org/10.1080/02286203.2022.2042057
Oezkaya, E.; Baumann, A.; Biermann, D.; Eberhard, P.: Modified internal cooling channels and investigation of cooling lubricant behavior in micro single-lip deep hole drilling. CIRP Journal of Manufacturing Science and Technology, (2021), Elsevier, pp. 93-104, doi.org/10.1016/j.cirpj.2022.04.003
2020
Oezkaya, E.; Bücker, M.; Biermann, D.: Simulative analyses focused on the changes in cutting fluid supply of twist drills with a modified flank face geometry. International Journal of Mechanical Sciences 180 (2020), doi: 10.1016/j.ijmecsci.2020.105650
Bücker, M.; Bartolomeis, A.D.; Oezkaya, E.; Shokranib, A.; Biermann, D.: Experimental and computational investigations on the effects of deep-temperature emulsion on the turning of Inconel 718 alloy. CIRP Journal of Manufacturing Science and Technology 31 (2020), pp. 48-60, doi.org/10.1016/j.cirpj.2020.10.001
Bücker, M.; Oezkaya, E.; Hensler, U.; Biermann, D.: A New Flank Face Design Leading to an Improved Process Performance when Drilling High-Temperature Nickel-Base Alloys. MIC Procedia on SSRN (2020), pp. 20-26, doi: 10.2139/ssrn.3722782
Reis, A., Aslantas K.; Oezkaya, E.: Kemik Delme İşlemlerinde Farklı Kesme Koşullarının ve Kesme Parametrelerinin Kesme Sıcaklığı Üzerindeki Etkisinin Araştırılması. Politeknik Dergisi (2020), doi:10.2339/politeknik.734894
2019
Oezkaya, E.; Bücker, M.; Strodick, S.; Biermann, D.: A thermomechanical analysis leading to a novel flank face design providing longer tool lives for tools used in the drilling of Inconel 718. International Journal of Advanced Manufacturing Technology, 102 (2019) 9-12, pp. 1-16, doi: 10.1007/s00170-019-03417-, ISSN: 1433-3015
Oezkaya, E.; Iovkov, I.; Biermann, D.: Fluid structure interaction (FSI) modelling of deep hole twist drilling with internal cutting fluid supply. CIRP Annals-Manufacturing Technology, 68 (2019) 1, pp. 81-84, doi: 10.1016/j.cirp.2019.03.003
Vogel, A.M.; Berger, S.; Oezkaya, E.; Biermann, D.: Vibration suppression in turning TiAI6V4 using additively manufactured tool holders with specially structured, particle filled hollow elements. Procedia Manufacturing 40 (2019), pp. 32-37, doi: 10.1016/j.promfg.2020.02.007
Oezkaya, E.; Michel, S.; Chip formation simulation and analysis of the mechanical loads during micro single-lip deep hole drilling of Inconel 718 with varying cooling lubricant pressure. Production Engineering Research and Development (2019), doi.org/10.1007/s11740-021-01021-x
Oezkaya, E.;Haus, T.; Biermann, D.: An intuitive software system for the modelling of three-dimensional FEM tapping simulations. World Journal of Engineering Research and Technology, 5 (2019), pp. 429-454, ISSN: 2454-695X
Ucak, N.; Cicek, A.; Oezkaya, E.; Aslantas, K.: Finite element simulations of cutting force, torque, and temperature in drilling of Inconel 718. Procedia CIRP 82 (2019), pp. 47-52, doi: 10.1016/j.procir.2019.03.277
Vogel, F.; Berger, S.; Oezkaya, E.; Biermann, D.: Schwingungsreduzierte Drehbearbeitung höherfester Stahlwerkstoffe durch additiven Werkzeugaufbau. Ingenieurspiegel, 3 (2019), pp. 17-19, Public Verlagsgesellschaft und Anzeigenagentur mbH
2018
Schnabel, D.; Oezkaya, E.; Biermann, D.; Eberhard, P.: Modeling the motion of the cooling lubricant in drilling processes using the finite volume and the smoothed particle hydrodynamics methods. Journal Computer Methods in Applied Mechanics and Engineering, 329 (2018), pp. 369-395, doi: 10.1016/j.cma.2017.09.015
Oezkaya, E.; Biermann, D.: A new reverse engineering method to combine FEM and CFD simulation three-dimensional insight into the chipping zone during the drilling of Inconel 718 with internal cooling. International Journal of Machining Science and Technology, 22 (2018) 6, pp. 881-898, doi: 10.1080/10910344.2017.1415933
Oezkaya, E.; Biermann D.: Development of a geometrical torque prediction method (GTPM) to automatically determine the relative torque for different tapping tools and diameters. The International Journal of Advanced Manufacturing Technology, 97 (2018) 1-4, pp. 1465-1479, ISSN 0268-3768 , doi: 10.1007/s00170018-2037-3
Bücker, M.; Oezkaya, E.; Biermann, D.: Investigations on the effects of an innovative flank face modification for the drilling of nickel-base alloys. Procedia Manufacturing 18 (2018), pp. 20-26, doi: 10.1016/j.promfg.2018.11.003
Oezkaya, E.; Hannich, S.; Biermann, D.: Development of a three-dimensional Finite Element Method simulation model to predict modified friction drilling tool performance. International Journal of Material Forming, (2018) 3, pp. 1-14, ISSN 1960-6206, doi: 10.1007/s12289-018-1429‑0
Vogel, F.; Oezkaya, E.; Biermann, D.: Additiver Werkzeugaufbau zur Dämpfung von Prozessschwingungen. VDI-Z Integrierte Produktion, 160 (2018) 1/2, pp. 42-45, ISSN 0042-1766
Oezkaya, E.; Michel S.; Biermann, D.: Kurze Späne beim Tiefbohren: Wendeltiefbohren, nichtrostender, austenitischer Stahl, Modellierung und Simulation. WB Werkstatt und Betrieb, 05 (2018), pp. 30-34, ISSN 0043-2792
Biermann, D.; Bücker M.; Oezkaya, E.; Haase, M.: Der Rand im Fokus. WB Werkstatt und Betrieb, 06 (2018), pp. 58-61
Oezkaya, E.; Hannich, S.; Biermann, D.: Simulation, Finite-Elemente-Methode (FEM), Fertigungstechnik: Untersuchungen zum thermischen Fließbohren – Dreidimensionale Modellierung und Simulation mit experimenteller Validierung. wt Werkstatttechnik online 10 (2018) 10, pp. 724-729
Oezkaya, E.; Schnabel, D.; Eberhard, P.; Biermann, D.: Kombinierter Modellierungs- und Simulationsansatz zur Strömungsuntersuchung der Kühlschmierstoffversorgung beim Einlippentiefbohren unter Berücksichtigung der Spanbildung. NAFEMS 47 (2018) 3, pp. 59-74, ISSN 2311-522X
Schnabel, D.; Oezkaya, E.; Biermann, D.; Eberhard, P.: Transient Simulation of Cooling-Lubricant Flow for Deep-Hole Drilling-Processes. Procedia CIRP 77 (2018), pp. 78-87, doi: 10.1016/j.procir.2018.08.224
Oezkaya, E.; Biermann, D.: Experimental and simulative investigation of the deep-hole oil distribution and comparison at the deep-hole drilling of the RANS k-ω-SST and RANS hybrid SAS-SST turbulence model. International Journal of Thermal Science and Engineering (2018), pp. 1-18, dx.doi.org/10.24294/tse.v0i0.874
Oezkaya, E.; Michel, S.: Experimental studies and FEM simulation of helical-shaped deep hole twist drills, Production Engineering. Production Engineering Research and Development Springer, (2018), pp. 11-23, ISSN 0944-6524 , doi: 10.1007/s11740-017-0779-7
2017
Oezkaya, E.; Biermann, D.: Segmented and mathematical model for 3D FEM tapping simulation to predict the relative torque before tool production. International Journal of Mechanical Sciences, 128-129 (2017), pp. 695-708, doi: 10.1016/j.ijmecsci.2017.04.011
Biermann, D.; Oezkaya, E.: CFD simulation for internal coolant channel design of tapping tools to reduce tool wear. CIRP Annals – Manufacturing Technology, 66 (2017) 1, pp. 109-112, doi: 10.1016/j.cirp.2017.04.024
Ucun, I.; Aslantas, K.; Oezkaya, E.; Cicek, A.: 3D numerical modelling of micro milling process of Ti6AI4V alloy and experimental validation. Advances in Materials and Processing Technologies, 3 (2017) 3, pp. 250-260, doi: 10.1080/2374068X.2016.1247343
Biermann, D.; Bücker, M.; Tiffe, M.; Oezkaya, E.: Experimental investigations for a simulative optimization of the cutting edge design of twist drills used in the machining of Inconel 718. Procedia Manufacturing, 14 (2017), pp. 8-16, doi: 10.1016/j.promfg.2017.11.002
Vogel, F.; Oezkaya, E.; Fuß, M.; Biermann, D.: Einsatz additiv gefertigter Werkzeugaufnahmen zur passiven Dämpfung von Prozessschwingungen. Unter Span – Das Magazin des Machining Innovations Network e. V., 1 (2017), Varel, 2017, ISSN 2365-7006, p. 22
Biermann, D.; Oezkaya, E.: Decreasing Drill Damage. ANSYS ADVANTAGE MAGAZINE, XI (2017) 1, Berkeley CA – USA, pp. 24-27
Biermann, D.; Oezkaya, E.; Schniering, B.; Koenen, H.-G.: ToolSimulation für die 3D-Gewindebohrsimulation und Drehmomentvorhersage: Entwicklung des FEM-basierten Software-Systems. wt-online, 107 (2017), 4, S. 293-300
Beer, N.; Oezkaya, E.; Biermann, D.: Uso do laser na ferramenta para aprimorar a refrigeracao na furacao de Inconel 718. Márquinas e Metais, 53 (2017) 615, pp. 18-23
Oezkaya, E.; Biermann, D.: Gezielte Kühlschmiermittelverteilung beim Gewindebohren mittels Strömungssimulation. Fachzeitschrift FORUM, 2 (2017) 30, pp. 90-96
Oezkaya, E.; Biermann, D.: CFD-Analyse der Kühlschmiermittelverteilung beim Gewindebohren: Effizientere Kühlschmierung durch Optimierung der Innenkühlkanäle. WB Werkstatt und Betrieb. 6 (2017) 150, pp. 60-63
Oezkaya, E.; Biermann D.: Neue Einblicke durch Strömungsanalyse in der Spanbildungszone. NAFEMS, 2 (2017) 42, pp. 57-68, ISSN 2311-522X
Oezkaya, E.; Michel S.; Biermann, D.: Strömungsanalyse der Kühlschmierstoffverteilung in der Kontaktzone beim Wendeltiefbohren. Diamond Business 4 (2017), pp. 30-37, ISSN 1619-5558
2016
Oezkaya, E.; Beer, N.; Biermann, D.: Experimental studies and CFD simulation of the internal cooling conditions when drilling Inconel 718. International Journal of Machine Tools and Manufacture, 108 (2016), pp. 52-65, doi: 10.1016/j.ijmachtools.2016.06.003
Biermann, D.; Oezkaya, E.; Hannich, S.; Fuß, M.; Schniering, B.; Koenen, H.-G.: Strömungsmechanische Optimierung von Hochleistungsgewindebohrern. VDI-Z Integrierte Produktion, 158 (2016) 2, ISSN: 0341-7255, pp. 30-33
Oezkaya, E.; Biermann, D.; Kleiner, G.; Beer, N.: Laser leitet Kühlschmierstoff zu den heißen Zonen. Industry Arena eMagazine – Online-Ausgabe 3, (2016), pp. 50-52
2015
Beer, N.; Oezkaya, E.; Biermann, D.: Effiziente Kühlschmierung für Bohrbearbeitung. WB – Werkstatt und Betrieb (Spezial), 148 (2015) 12, pp. 60-63
2014
Beer, N.; Oezkaya, E.; Biermann, D.: Drilling of Inconel 718 with Geometry-Modified Twist Drills. Procedia CIRP, 24 (2014), pp. 49-55, doi: 10.1016/j.procir.2014.07.124
2013
Bayraktar, E.; Oezkaya, E.; Münster, R.; Biermann, D.; Turek, S.: Nozzle design for low-pressure micro abrasive waterjet blasting via CFD-simulations. Reports of the Institute Applied Mathematics and of the Institute of Machining Technology, number 465, Faculty of Mathematic, Technical University of Dortmund, (2013)
Oezkaya, E.; Bayraktar, E.; Turek, S.; Biermann, D.: A novel abrasive blasting process: Abrasivemedium classification and flow simulations. Journal of Materials Science and Engineering Technology, 44 (2013) 6, pp. 577-588, doi: 10.1002/mawe.201300124
Biermann, D.; Oezkaya, E.: Abrasivstrahlsystem für schwer zerspanbare Bauteile. Mikroproduktion, (2013) 1, pp. 38-41
Oezkaya, E.; Bayraktar, E.; Turek, S.; Biermann, D.: Abrasive medium classification and CFD simulations for low-pressure abrasive water-jet blasting. Reports of the Institute Applied Mathematics and of the Institute of Machining Technology, number 469, Faculty of Mathematic, Technical University of Dortmund, (2013)
2012
Biermann, D.; Oezkaya, E.: Gratcharakterisierung und -simulation – Experimentelle und numerische Untersuchung der Gratbildung beim Mikrofräsen. VDI-Z Integrierte Produktion, 154 (2012) 9, ISSN: 0341-7255, S. 70-73